6000PLUS Discrete Sounder/Sounder VAD

 

  • High Output Electrical Sounder

  • Visual Alarm Device (VAD) with 7.5 Coverage Diameter

  • Programmable Volume Control

  • LED Technology for Long Service Life

  • Quick and Simple to Install

  • FAST™ Addressing

  • Loop Powered and Integral Short Circuit Isolator

  • Protec Algo-Tec™ 6000PLUS Protocol

  • Approved to EN54 Part 3, 17 & 23

 

 

Description

The Protec 6000PLUS Discrete Sounder with optional Visual Alarm Device (VAD) is Loop Powered and utilises the 6000PLUS sensor range common mounting base.

Sounder – The device is equipped with an integrated loop powered electronic sounder with three programmable sounder tone options, constant, pulse or harble, selectable by the control panel along with adjustable volume control. A loop short circuit isolator is also incorporated. The sounder tones are compatible with the full range of Protec 6000 Electronic Sounders.

Discrete VAD - The device is designed for installation at a height of up to 3m and adjustable from 3m to 7.5m room coverage to suit all applications.

For smaller areas, the device can be switched down from 7.5m to 3m thus reducing power consumption and maximising the number of devices on the loop.

The product has a unique lens that distributes the light in a cylindrical shape to achieve the required illumination of 0.4lux/m² over the entire room area in accordance with EN54 Part 23.

The design is based on LED technology for long life, reliability and low power consumption. Compliant with DDA legislation, this high intensity led VAD warns those with hearing impairments or in noisy environments.


Technical

Environment

-10°C to +50°C (95% R.H. non condensing or icing)

Ingress Protection

IP33C

Weight (excluding base)

98g

Loop Powered

Yes

Loop Standby Load

6000P/S - 0.4mA
6000P/SVAD - 0.55mA

Loop Peak Alarm Load

6000P/S - 5mA
6000P/SVAD - 24mA

Loop Voltage

18 - 28V

Mounting Height (x)

3 metres

Coverage(y)

7.5m configurable to 3m

Coverage Volume Code

C-3-7.5

Flash Rate

0.5Hz white flash

Isolator

Yes

Dimensions (mm)

95ø x 54.5H

Device Protocol

Algo-Tec™ 6000PLUS

Product Approval

CoCP No: 0359-CPR-0407
DoP No: PFD-CPR-0122 (6000P/S)
DoP No: PFD-CPR-0123 (6000P/SVAD)
Relevant Standard: EN54 Part 3, 17 & 23
CE Marked

Diagram

Typical Wiring using 6000PLUS/BASE

 

 

Other

Tone Options

Warble Tone: 990Hz(250ms), 730Hz(250ms)
Continuous Tone: 990Hz
Pulse Tone: 990Hz(500ms), Silence(500ms)
 

Tone Volume Options

The tone and volume are selectable at the control panel (measured at one metre):
High: 85dB(A), Mid: 75dB(A), Low: 65dB(A)
 

BASE Options
 

6000PLUS/BASE
- Low profile common mounting base

6000PLUS/FFBASE
- Fast fixing semi recessed base


Note - base options above are included in the product approval.

 

 

15LHK0960-01